Pop-up sculpture, Origami Architecture or Kirigami

Handmade paper model

Pop-up sculpture, Origami Architecture or Kirigami

Sculpted into a single folded piece of high quality white glossy photo paper

Looks fantastic with a coloured back light

Actual paper model shown in picture

(not a template or pattern kit)

Hand cut with craft knife and shaping the paper takes many hours to complete

this highly collectible and decorative model.

Could also be used as an executive pop-up gift card.

Depth = 9cm
Height = 9cm
Width = 23cm

More to follow soon

Very low reserve now on ebay


Craft knife sharpening tip

Whatever kind of  blade you use for cutting, will at some point become blunt, making it harder to slice through of even score. A blunt knife tip can easily ruin your work by ripping or tearing rather than neatly slicing. Having to buy new blades on a regular basis can be very costly,  so resharpening your worn or damaged blades is a great way to save you time and money.

Sharpening a blade back to it’s manufacturers original finely honed tip using an oil stone could be recognised as  an art form on it’s own. Never try to resharpen the cutting edge of a blade as you are more likely to ruin it rather than repair it and it could become dangerous to you and your chosen work material.

Remembering that your cutting blade or knife edge has been produced by some finely tuned machinery, so the key is to keep as much of the original edge as possible and here’s how!

If your blade is seriously blunt, you need to start by using a coarse material to regrind the cutting tip. My favourite is a common paving slab that I have in my garden. If able, take a seat on the floor so you are closer to the ground. Now make sure your blade is set tightly in it’s recommended handle, (never try to cut with or sharpen a lose blade), and look at the back edge of the blade as this is what we will be regrinding.

Hold your knife at a slight angle in a comfortable manner with the back of the cutting edge facing the ground. Firmly drag the knife backwards to the side of you (never forwards as will tend to chip the blade) around a dozen times across the ground and inspect it.

Wipe away any dust then check out your newly ground cutting tip. This will have created a brand new blade at no cost! For finer work like paper, you will need to remove the roughened edge using a sharpening stone or fine metal file to create a super strong and safe to use pointed tip. It shouldn’t take more than a minute to recycle an old blade into new and could give you many hours of use!


Origami Architecture Template

 

Here is a simple but impressive paper structure for you to try 😉

You will need: a piece of A4 paper, a cutting board, a craft knife, a steel rule.

Lightly score grey dots for uniform folds. (Do not cut right through)

Cut right through parallel grey lines.

Cut out frame & discard waste.

Cut right through grey centre lines so that frame is in two halves.

Carefully fold grey dots.

Push frame pieces inside each other to make elevated rays stand upwards. Fix with glue or tape. Then Display!

Origamic architecture template

Resize (if necessary), using paint or other editing tool. Print it off on any type of paper, plain or coloured looks great or get a more solid look using glossy photo paper, but it is a little trickier to cut and fold. The cutting lines are on the back of this structure once finished so, don’t worry about them showing.


Mona Lisa Haunted Papercraft

Haunted Papercraft

Just a piece of plain paper? Look again!

By using countless folds and creases to suggest highlights and shadow I have forged an image of the worlds most famous female portrait, ‘The Mona Lisa’ into a plain piece of A4 paper. Hard to make out at first, I agree.  It’s my very 1st attempt at this style of decorative papercraft work, which I call ‘Haunted Papercraft’ as the image is faint and ghostlike.


Optical illusion using real wood veneers

Marquetry Art

Illusion

Not paper this time, but some left over pieces of wooden veneer from a restoration project. This use of natural wood veneers creates a few leafy stems, a flower  and a Butterfly giving the illusion of a woman’s face.


papercraft tools

Basic paper crafting doesn’t need much more than a pair of scissors and your design, drawn or ideally printed on it so that you can carefully cut it out and add glue to stick it together.

As you progress in paper craft, your models become more precise and will have finer detail to deal with. I suggest the following items for good, neat and tidy paper craft models:

A Craft knife or scalpel for perfect cuts

A Cutting board is a must for protecting your work table

Cocktail sticks are ideal for applying glue and aren’t as messy as a brush

Matt photo paper is great for pliability and prints much brighter colours than basic or cheaper paper

PVA glue is safe, strong, dries clear and dries fast.

A steel rule is used for a perfect straight line. Plastic and wooden rulers are too soft and you could cut into the ruler and ruin it and your work.

Scissors are useful for cutting out larger waste paper pieces.

Tweezers are good for picking up small pieces and will even help with creating smaller folds.


papercraft an inexpensive hobby

Papercraft is a fantastic pastime that is available to everyone who has access to a piece of new (or used),  paper and a reliable cutting tool such as a craft knife or pair of scissors.

Even young children can create great ornamental and decorative models with this inexpensive hobby but, should always be supervised when using sharp cutting tools and strong adhesives.

Aeroplane, animal, boat, car and gaming figure templates are popular and are widely available for downloading all over the internet and can be printed out for free if you have a reliable colour printer at home or you could use your local library for internet access and printing for a small fee.